FAQ usager

Votre panier

02/05/2022

Dodge keith lawley2 (230Pts.)

Evo one only responds when its in valet mode

Evo one s/n 002B04108567 programs correctly with 2010 dodge challenger standard key wire to wire oem key fob and blue light flashes after when pressing lock or unlock , yellow light turns on when starting the car. The problem is minutes later the unit appears to end in in valet mode , red light on the side near yellow cut wire is on. When I take the unit out of valet mode , red light turns off but I no longer receive the blue light when locking or unlocking the car with the oem fob. When I attempt to remote start the car 3x lock the eed light turns on then the yellow light turns on but the car doesn't crank at all and only attempts to try 1x even though programming is set for 2x attempts. Then I get 4 clicks or flashes from the module. I followed guide #94481 for installation and have tried the basic bear options with my flash link 2 updater on 59.02 and 74 38 and 1 25 firmwares. I notice to anytime I try to run the module on the FL updater the FL updater has to be updated each and every time with 4 05 ? Any help appreciated , no oem alarm

evo

one

dodge

challenger

remote

start

Connectez-vous pour répondre Voir 1 réponse(s)

06/03/2022

Dodge keith lawley2 (230Pts.)

Can I get my Evo One Reset ?

Flash Limit Reached on Evo One. Please Reset. S/N 002B04108567 And should I do the recommended update that is suggested by the flask link update tool or do I stick with the version on the instruction. 2010 dodge challenger standard key standard installation , no T harness. Bypass* Recommended version 74.39 OR instruction version 59.01 Remote start* version 1.25 Flash link 2 unit version 4.05 has to be re updated everytime I use it for reason. (windows 11)